Removal and installation of switches: the alarm system, the uniform lock, Glass lifts
REMOVAL
1 Disconnect-1 and turn away it upward.
2 Turn out screws-1. 2 – a peak of the lever of a gear change.
3 raise a peak-2 a little and take out from below the switch Glass lifts-3. For this purpose press a clamp-4.
For descriptive reasons the peak on an accompanying illustration is shown in the turned position.
4 Take out the switch of the emergency alarm system / the uniform lock.
5 Rasstykujte a socket.
INSTALLATION
6 Join a socket at the switch.
7 Connect the switch window lifterа in a peak of the lever of switching, press on the other hand and fix.
8 Press the switch of the emergency alarm system / the uniform lock into a peak.
9 Fix a peak and connect to it a cover.